boardroomtech.com

90 degrees only edge sharpener with file 100x25mm will take longer files

Great pocket size sharpener that does 89/88 degree and by moving the file to do the base as will comes with file

Ski only sharpener automatic angle variation that grips both sides of the ski with file 70x25mm

For ski/boarders this is the ultimate sharpener,that dose base and edge different degrees at the same time and picks up all your metal filings, comes with coarse,fine and finishing stone also with cleaning brush.

This little brush is very useful in keep your files up to scratch.

Milled coarse 300x30mm some time call the tech bastard file for it quick removal of burrs and then go to a finer file.

This chromed fine file is ideal for tuning up those niggling burrs.

Universal brush in white nylon for first brushing of medio-hard waxes.

Bronze Brush is ideal for all cleaning operations, for brushing hard waxes like Map Black and waxes for cold temperatures and for perfect cleaning after stone grinding.

Horse-Hair brush for finishing after use of 100% fluor products.

Soft bristle brush for finishing after use with high fluor waxes, especially for warm snow conditions.

Universal brush in natural fiber for all first brushing operations. More incisive than a nylon brush.

• New generation professional equipment
• Electronic microprocessor temperature control of extreme precision.
• Base plate in pressure cast aluminum
• New ergonomic design to assure easy handling
• Respects CE security standards

SOLD OUT

If you have Mugne-Traction or similar,this is the tool for you. Check out tips/tricks.Superb pocket tool with fine file for easy/quick sharpening of the side edges either on the slope or in the boot room. Angle adjustable 1-5 degrees.

Base bevelling file guides,for uniform processing of the base side edges, come with file.1.0 degree,20mm

Why diamonds,is a tech best friends,gives a ultimate polish finish to your cutting edge.70+25mm medium file.

Hard fine gummi stone for removing the hanging burr after tuning the side edge angle. Also great for removing rust from edges.And with buying a new board/skis you must detune the contact point.

High qualite HSS-steel blade with handle,to flatten the base.The rear side of the base is shaped as a true bar,and with spare blade.

If you have Triple Base Tech or a combi base,you will need a small scraper,to move with the contours of the base.3mm wax scraper

Base scraper For flattening down base repairs & removing raised base dinks from rock strikes,and great for p-tex repairs.

Solid rubber ring with handy retaining hook,for fast and comfortable use.

Power independent appliance for easy repair of damaged base sections.Temperature adjustable,no open flame! Work on lighter gas.If you are off to work a season,this is a great little gadget to earn some extra money.

Strips for dipping or melting into the base.

Multi-Position board service vice,with 4 different practical board holding positions.Light,stable and inexpensive.If you are off to work a season,this is the gadget to earn some extra money.

Multi-position snowboard service vice set c/w clamps. Four different practical board holding positions. Light, stable & a superb piece of kit.If you are off to work a season,this is the gadget to earn some extra money.

Wax scraper,to remove excess wax off.

For all temertures and snow condition.This is a quick and easy way to hot wax your board.200gr a bag (should do approx 10 to 15 boards)

For rubbing on or ironing. For all temertures +10 to -10 and snow condition. 130gr only

New FC-wax,extre hard and wear-resistant,waterrepellant.For rubbing on or ironing. For all temertures +10 to -10 and snow condition
130gr only

To remove old wax and dirt.harmless to the base.250ml only

If you are applying finishing compounds such as speed pastes, or are using a rub in wax, a polishing block will give you a much improved finish resulting in improved performance and a longer life span for the product applied to your base.

There is the best iron I have come across,for the size and will work in EU and USA. also very light only 580gms.

Start up kits to Base Kits

With mounting handware included.

This is the perfect tool for keeping your board/skis safe.

Simple, fast and secure ski hold.

Special Features:

100% full grain water-proof leather, double prong buckle with bottle opener, #2 Phillips and flathead, 8/10/11mm wrench loop, brushed nickel or dull black finish

Special Features:

100% full grain water-proof leather, double prong buckle with bottle opener, #2 Phillips and flathead, 8/10/11mm wrench loop, brushed nickel or dull black finish

SOLD OUT